Giremon: Custom Evening Gowns
Giremon drafts evening gowns from scratch in the Grovedale studio. Corsetry, beading and silk that behaves itself under lights. If you have a dress in your head that no shop stocks, this is where it gets made.
The first meeting, honestly
We ask about the event, the lighting, and whether you will be sitting for hours or dancing. Then we talk about what you feel good in, which is not always what the magazines suggest.
Bring the shoes and the underwear you plan to wear on the night. Boning and drape both behave differently over the right foundation.
Drafted, never altered
Every gown starts from a blank sheet of paper. Nothing is pulled off a rack and taken in at the waist as an afterthought.
Four fittings, standard
The first is a calico toile and the last is a hem check. Between them we settle the neckline, the corsetry and the drape until it sits properly.
Beaded by hand
Sequins, crystals and pearls are stitched on individually. It is slow work and it is the reason our beadwork does not shed on the dance floor.
A gown should hold you up, not just cover you
Evening wear is engineering disguised as fabric. The corsetry carries the weight, the boning keeps the bodice honest, and the outer layers only have to look effortless. Get the structure wrong and the whole dress sulks.
We build an internal corselette for strapless and off-shoulder shapes, boned to the waist and closed with a hook-and-eye placket. That is what keeps a heavy silk gown where it belongs at eleven at night.
Start with a consultation
Where corsetry meets the red carpet
Our head of evening wear trained in bridal corsetry in Naples and came home with a lasting dislike of shortcuts. Every bodice is boned by hand and tested on the body before the outer fabric is cut.
- Hand-boned corselette in every strapless or off-shoulder gown
- French seams throughout, so nothing itches at the waist
- Beadwork and appliqué stitched, never glued
- Hidden pockets in the skirt lining on request
I had a very specific idea about a teal dress with a train and I was braced for someone to talk me out of it. Nobody did. They just made it work.
Priya Raghavan Client, Melbourne gala
Gown pricing, laid out flat
Fabric and beadwork are quoted after the design meeting, because a column gown in matte crepe and a beaded ballgown do not belong in the same bracket. These figures cover labour and construction.
Column gown
A one-piece bias-cut column in crepe or satin. No boning unless the neckline needs it, no train, back zip. The cleanest way to do evening wear.
- Bias cut with French seams
- Two fittings including a calico toile
- Lined bodice with soft cups
Structured evening gown
Boned corselette, a shaped bodice and a skirt with some sweep to it. This is the shape for galas, black tie weddings and anything with a step-and-repeat.
- Hand-boned internal corselette
- Four fittings, toile included
- Invisible zip and hook placket
- Bustle loop for the train
Beaded and appliquéd
Everything in the structured tier plus hand beadwork across the bodice or the whole skirt. Beading alone runs thirty to forty hours, so early booking matters.
- Hand-stitched crystal and pearl work
- Custom appliqué cut to the design
- Five fittings with a beading preview
From sketch to final hem
Six stages, roughly nine weeks, and one very honest conversation about what a gown will actually do when you sit down in it.
Design meeting
Two hours of references, sketches and straight talk about the event. We measure, we photograph the silhouette options and we decide how the corsetry should be built.
Toile fitting
The gown is built in calico first. Cheap fabric, no pressure. We cut the neckline, shift the waist and confirm the skirt volume before any silk is touched.
Corsetry and construction
The corselette is boned to measure and fitted on its own before the outer layers go near it. This is where the gown learns to hold its shape.
Beading preview
Beadwork starts on a sample panel and gets pinned to the bodice so you can see it in real light. Designs usually get simplified at this stage, and that is fine.
Silk fitting
The real fabric goes on. Neckline, armhole, hem and train all get checked. Minor adjustments only, because the structure is already settled.
Hem, press and collection
Final hem on the body, a bustle loop if there is a train, a careful press and a handover with a care sheet. You leave with the gown in a breathable bag.
Gowns we have finished lately
Photographed on the stand at the studio. Real commissions and real clients, with nothing retouched on the beadwork.
Before you book
These are the five things clients ask on the phone before they commit to an appointment.
Ask us directlyStart a gown commission
Tell us the event date and the shape you have in mind. Photos help. We reply within a business day with available appointment slots.
-
Ring the atelier +61 3 8472 6195
-
Write to the atelier giremon@hotmail.com
-
Where we sew 351-359 Torquay Road, Grovedale VIC 3216, Australia
-
When the door is open Wednesday to Saturday, 10am to 6pm, with Thursday evenings until 8pm.